featured, Piecing Makeover, quilt, quilting, quilts

Little Lone Star {free pattern}

I made this sweet little Lone Star quilt for my friend Sarah to hang at the Intown Quilters booth during Quilt Con 2017. She gave out the pattern during the show and I thought I’d share it here, as well.

The quilt is really quick and easy to put together. Enjoy!


Lone Star ~43-1/2” x 43-1/2”
Designed, Pieced and quilted by Patty Murphy,
based on my book Piecing Makeover

16 fat eighths
1 yard background fabric (we used Essex Yarn-Dyed Linen in Flax)
1/2 yd binding

*You can buy fat eighth bundles here and Essex Yarn-Dyes Linen here

Cutting Instructions: 
          Fat eighths:
Cut three 2-1/2” x 21” strips from each fat eighth.

          Background fabric: 
First cut one 20” x 20”square.
Then cut four 12-1/2” x 12-1/2” squares.

Assembly Instructions
1. Sew 12 sets of 4 strips. Press open seams.
2. Cut strip sets on a 45° angle. You will get 3 full strips from each set, giving you a possible 36 strips to use for your Lone Star. You will have extra to use.
3. Arrange the strips on a design wall to make the Lone Star. Four strips go into each diamond section.
4. Sew each of the 8 diamond sections together, making sure you off-set the seams to create perfect points. (pg. 110, Diamonds)
5. Once you have 8 diamond sections, sew the top 4 together to make the top of your star then sew the bottom 4 together to make the bottom half of your star.
6. Sew the 2 sections together, making sure you match points in the center and furl your seams to reduce bulk. (pg. 27, Furling Busy Intersections)
7. Using a y-seam, sew each of the 12-1/2” x 12-1/2” background squares into each of the corners. (pg. 105, Hexagons)
8. Cut the 20” x 20” background square twice on the diagonal to get 4 triangles.
9. Using a y-seam, sew the triangles cut in Step 8 into the quilt along the top, bottom, and sides. (pg. 105, Hexagons)
10. Quilt, bind, and enjoy! See it on IG: #pmlonestar


2 thoughts on “Little Lone Star {free pattern}”

Leave a Reply